Ladder Rung Covers

Safety Step Anti-Slip Ladder Rung Covers feature a gritted surface that provides superior grip for hands or feet, no matter the conditions. With a larger surface area than bare rungs, these covers increase the contact area to make ascending and descending safer than ever. Available for both round and square rung designs, Safety Step Ladder Rung Covers provide an easy and simple solution to eliminate the risk of slipping when using ladders.

LENGTH (A) – Safety Step Ladder Rung Covers come in standard off-the-shelf lengths that will fit most applications, however special lengths can be produced upon request. The required “length” of the ladder rung cover is generally up to 2” (50 mm) shorter than the length of the actual ladder rung. This is to ensure that there is no obstruction (e.g., a weld bead) that may interfere with the seating of the rung cover.

WIDTH (B) – The required “width” of the Safety Step Ladder Rung Cover is the internal dimension between the two drops or “legs” of the rung cover. The internal width of a ladder rung cover should be 1/16–1/8” (2–3mm) greater than the outside diameter of the actual ladder rung. This allows for a cushion layer of adhesive to sit between the ladder rung and the ladder rung cover.

Safety Step Ladder Rung Covers come in four grit sizes to fit any application:

Safety Step anti-slip products provide an innovative way of navigating at night with their glow-in-the-dark capability. Fully embedded photoluminescent strips charge with exposure to a light source and then glow bright green for a minimum of 12 hours in dark or low light conditions. They identify step edges or illuminate emergency evacuation routes with critical visibility to ensure safe egress from any facility.